Table of Contents
Advertisement
1
Fig. F/R lever
1. Offset steering
Figure. Display
74
Combi machines
Pivotal steering (Optional)
The machine must be in the operating position to
activate the pivotal steering. Use the two front buttons
(1) on the forward/reverse lever to operate the pivotal
steering.
To reset the rear drum to neutral, adjust the buttons
(1) until the display (2) shows that the machine has
aligned the drums.
The symbol for Work mode shines continuously in
neutral (drums in line)
If fault indication on the display is shown or if the
buzzer sounds, stop immediately the roller in a safe
place and shut off the Diesel engine. Check the cause
for failure and remedy, see also maintenance manual,
2
trouble shooting guide or engine manual.
4812159901_D.pdf
Inspect the tire treads from time to time to
Inspect the tire treads from time to time to
ensure no asphalt has stuck to the tires. This
ensure no asphalt has stuck to the tires. This
can occur before the tires are sufficiently warm.
can occur before the tires are sufficiently warm.
Mixing 2-4% cutting fluid to the tire sprinkler
Mixing 2-4% cutting fluid to the tire sprinkler
water can prevent this problem.
water can prevent this problem.
Operation
2023-01-25
Advertisement
Table of Contents
