1
Fig. Oil level check - wheel gear
1. Level plug
2. Filling plug
Fig. Drum, vibration side
1. Rubber element
2. Attachment screws
154
Wheel gear - Checking the oil level/Filling the
oil
Place the roller on a level surface. Move the machine
until the inspection/filling holes are in position for filling.
2
1
2
Refill with new oil, about 0.8 l (0.85 qts). Use
transmission oil according to the lubricant specification.
Ensure that the oil level reaches up to the lower edge
of the plug hole.
Clean and refit the plugs.
Rubber elements and attachment screws
Check
Check all rubber elements (1). Replace all elements if
25% or more than 25% of the number on one side of
the drum have cracks deeper than 10-15 mm (0.4-0.6
in).
1
Check using a knife blade or pointed object.
Check also that the attachment screws (2) are
tightened.
2
4812159901_D.pdf
Maintenance - 2000h
Fig. Wheel gear
2023-01-25