Table of Contents
Advertisement
Maintenance, 10h
Removing the scapers
The scrapers can easily be removed for cleaning and
inspection.
Release the inner pin on the hook-up axle, grip the
outer pin and pull the axle straight out.
The scrapers must be hooked in the release locking
hook to avoid risking that they drop down to the
ground.
When refitting after inspection etc., the scraper must
first be hooked in the locking hook before the hook-up
axle is put in position.
Refit the inner pin and make sure that the rubber
coated wire comes over the scraper attachment.
2023-01-25
4812159901_D.pdf
115
Advertisement
Table of Contents
