Table of Contents
Advertisement
11 SERVICE WORK ON THE CHASSIS
11.8
52
S05331-10
Installing the fork legs
F03665-11
W00250-11
S05331-11
–
3
Loosen screws
. Remove the left fork leg.
–
4
Loosen screws
. Remove the right fork leg.
Main work
(SX)
–
Position the fork legs.
Air bleeder screw
to the front.
A
Valve
of the left fork leg faces the front.
Info
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the
top) must be flush with the upper edge of the upper
triple clamp.
The air suspension is located in the left fork leg.
The pressure and rebound damping is located in
the right fork leg.
(XC)
–
Position the fork legs.
1
Bleeder screws
toward the front.
Info
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the
top) must be flush with the upper edge of the upper
triple clamp.
The air suspension is located in the left fork leg.
The pressure and rebound damping is located in
the right fork leg.
–
2
Tighten screws
.
Guideline
Screw, top triple
clamp
–
3
Tighten screws
.
Guideline
Screw, bottom triple
clamp
1
of the right fork leg is positioned
of the fork legs are positioned
M8
17 Nm (12.5 lbf ft)
M8
12 Nm (8.9 lbf ft)
Advertisement
Table of Contents
