Transport - PRONAR VMP-5ST Manual

SECTION 1
• bearings,
• cutting blades.
The warranty service only applies to such cases as: mechanical damage which is not the
user's fault, factory defects of parts, etc.
In the event of damage arising from:
• mechanical damage which is the user's fault, road accidents,
• incorrect use, adjustment or maintenance, use of the mixer feeder for purposes
other than those for which it is intended,
• use of damaged machine,
• repairs carried out by unauthorised persons, repairs carried out improperly,
• making unauthorised alterations to machine design,
the user will lose the right to warranty service.
TIP
Demand that the seller carefully and precisely fills out the WARRANTY BOOK and
warranty repair coupons. A missing date of purchase or sale point stamp may make the
user ineligible for any warranty repair or refund.
The user is obliged to report immediately on noticing any wear in the paint coating or traces
of corrosion, and to have the faults rectified whether they are covered by the warranty or not.
For detailed Terms & Conditions of Warranty, please refer to the WARRANTY BOOK
attached to each newly purchased machine.
Modifications of the machine without the written consent of the Manufacturer are prohibited.
In particular, do NOT weld, drill holes in, cut or heat the main structural elements of the
machine, which have a direct impact on the machine operation safety.

1.5 TRANSPORT

The mixer feeder is ready for sale completely assembled and does not require packing.
Packing is only required for the machine's technical documentation and any extra equipment.
The machine is delivered to the user on a transport vehicle.
Pronar VMP-5ST | Pronar VMP6-ST
1.9