Transport; Transport On A Vehicle - PRONAR PT512 Operator's Manual

Pronar PT512 CHAPTER 1

1.5 TRANSPORT

The trailers are sold completely assembled and do not require packing. Only the machine's
technical documentation and extra equipment are packed. The trailer can be delivered to the
user either on a vehicle or independently (trailer towed with a tractor).

1.5.1 TRANSPORT ON A VEHICLE.

Loading and unloading of the trailer is to be conducted by means of a loading ramp with the
aid of a tractor. During work adhere to the general OSH regulations applicable to reloading
works. Persons operating a reloading equipment must have the qualifications required to
operate them. The trailer must be properly coupled with a tractor according to the
requirements given in this Operator's Manual. The trailer's braking system must be activated
and checked before driving off or onto a ramp.
The trailer should be attached firmly to the platform of the vehicle by means of straps, chains
or guy ropes with a tightening mechanism. The securing elements must be hitched to the
transport lugs designated for that purpose (1) – see figure (1.3) – or trailer's structural
elements (longitudinal members, cross-bars etc.). Transport lugs are welded to the upper
frame longitudinal member (2) – one pair on each side of the trailer. Use only certified and
technically reliable securing means. Worn straps, cracked securing catches, bent or corroded
hooks and other damage may render a given securing mean unusable. Carefully read the
information in the Operator's Manual relating to a given securing mean. Place chocks,
wooden beams or other objects without sharp edges under the wheels of the trailer to
prevent it from rolling. Objects blocking the trailer wheels must be nailed to the planks of the
transporting vehicle platform or secured in other way to prevent their movement. The number
of securing elements (cables, straps, chains, stays etc.) and the force required to tension
them depends on several factors, including the weight of the trailer, the construction of
vehicle transporting the trailer and other conditions. In order to secure the trailer on the
platform correctly, support its drawbar on a set of wooden blocks. It is impossible to define
the plan to secure the trailer in a precise manner. A correctly secured trailer will not change
its position with regard to the transporting vehicle. The securing means are to be selected
according to the guidelines of their manufacturer. In case of doubt use a greater number of
attaching points and securing means. If necessary, secure sharp edges of the trailer thus
protecting securing means against breaking during transport.
1.12