Preliminary Information; Servicing Wheel Axle - PRONAR VMP-5ST Manual

Pronar VMP-5ST | Pronar VMP-6ST
5.1

PRELIMINARY INFORMATION

When using the mixer feeder, regular inspections of its technical condition and the
performance of maintenance procedures are essential, which keep the machine in good
technical condition. In connection with this the user of the mixer feeder is obliged to perform
all the maintenance and adjustment procedures defined by the Manufacturer.
Repairs during the warranty period may only be performed by authorised service points.
Detailed procedures and extent of activities which the user may perform by himself are
described in this section. In the event of unauthorised repairs, changes to factory settings
and other actions, which are not regarded as possible for the mixer feeder operator to
perform, the user shall invalidate the warranty.
5.2

SERVICING WHEEL AXLE

5.2.1 PRELIMINARY INFORMATION
Work connected with the repair, change or regeneration of axle components should be
entrusted to specialist establishments, having the appropriate technology and qualifications
for this type of work.
The responsibilities of the user are limited to:
• inspection and adjustment of slackness of axle bearings,
• mounting and dismounting wheel, inspection of wheel tightening,
• checking air pressure, evaluating technical condition of wheels and tyres.
Procedures connected with:
• changing grease in axle bearings,
• changing bearings, hub seals,
• repairing wheel axle,
may be performed by specialist workshops.
5.2
SECTION 5