Table of Contents
Advertisement
SECTION 5
TIP
Tyre pressure values are specified in information decal, placed on wheel or on the frame
above machine wheel.
DANGER
Damaged tyres or wheels may be the cause of a serious accident.
While checking pressure pay attention to technical condition of wheels and tyres. Look
carefully at tyre sides and check the condition of tread.
In case of mechanical damage consult the nearest tyre service and check whether the tyre
defect requires tyre replacement.
Wheels should be inspected with regard to distortion, breaking of material, breaking of welds,
corrosion, especially in the area of welds and contact with tyre.
Technical condition and appropriate maintenance significantly extends the life of these
components and ensures appropriate level of safety to mixer feeder users.
Checking air pressure in tyres and visual inspection of steel wheels:
5.3 HYDRAULIC SYSTEM MAINTENANCE
5.3.1
PRELIMINARY INFORMATION
Work connected with the repair, replacement or regeneration of hydraulic system
components should be entrusted to specialist establishments, having the appropriate
technology and qualifications for this type of work.
• every 1 month of use,
• every week during intensive work,
• if needed.
Pronar VMP-5ST | Pronar VMP-6ST
5.9
Advertisement
Table of Contents
