Table of Contents
Advertisement
SECTION 5
5.2.2
CHECKING WHEEL AXLE BEARINGS FOR SLACKNESS
FIGURE 5.1 Lifting jack support point
(1) wheel axle, (2) axle fastening plate
Preparation procedures
Hitch the mixer feeder to tractor, immobilize tractor with parking brake.
Park tractor and mixer feeder on hard level ground.
Place securing chocks under the mixer feeder wheel. Ensure that machine will
not move during inspection.
Raise the wheel (opposite to the side where chocks are placed).
Tractor must be placed to drive forward.
Lifting jack should be positioned in the place indicated by the arrow in
figure (5.1). Lifting jack must be suited to weight of mixer feeder.
Pronar VMP-5ST | Pronar VMP-6ST
5.3
Advertisement
Table of Contents
