Basic Safety Rules - PRONAR VMP-5ST Manual

Pronar VMP-5ST | Pronar VMP-6ST

2.1 BASIC SAFETY RULES

2.1.1 BASIC SAFETY RULES
• Before using the mixer feeder, the user must carefully read this Operator's
Manual and the Operator's Manual of the PTO shaft. During use all the
recommendations laid down in this Operator's Manual should be observed. Do
NOT start the mixer feeder without knowledge of its function.
• The user is obliged to acquaint himself with the construction, action and the
principles of safe usage of the machine.
• Before using the mixer feeder always check the machine, whether it is properly
prepared for work, especially in terms of safety.
• If the information contained in the Operator's Manual is difficult to understand,
contact a seller, who runs an authorised technical service on behalf of the
manufacturer, or contact the manufacturer directly.
• Careless and incorrect use and operation of the mixer feeder and also non-
observance of the recommendations contained in this Operator's Manual,
endanger health and life third persons and/or machine operator.
• Be aware of the residual risk. Use caution when operating the mixer feeder and
apply all relevant safety principles.
• The machine must never be used by persons who are not authorised to drive the
agricultural tractors and not trained in the safety principles and use of the
machine, including children and people under the influence of alcohol.
• Do NOT use the mixer feeder for purposes other than those for which it is
intended. Anyone who uses the machine in any other way than the way intended
takes full responsibility for any consequences of this use. Use of the machine for
purposes other than those for which it is intended by the Manufacturer may
invalidate the warranty.
• Use close fitting protective clothing.
• Any modification to the mixer feeder frees the manufacturer from any
responsibility for damage or detriment to health which may arise as a result.
2.2
SECTION 2