Information And Warning Decals - PRONAR VMP-5ST Manual

Pronar VMP-5ST | Pronar VMP-6ST

2.2 INFORMATION AND WARNING DECALS

The mixer feeder is marked with information and warning decals referred to in table (2.1).
The symbols are positioned as presented in figures (2.2) and (2.3). Throughout the time the
machine is in use, the user of the machine is obliged to ensure that notices and warning and
information symbols located on the mixer feeder are clear and legible. In the event of their
destruction, they must be replaced with new ones. Safety decals are available from your
PRONAR dealer or directly from PRONAR customer service. New assemblies, changed
during repair, must be labelled once again with the appropriate safety signs. While cleaning
the mixer feeder, do not use solvents which may damage the coating of information labels
and do not subject them to strong water jets.
TABLE 2.1 Information and warning decals
ITEM
1
2
SAFETY SYMBOL
Before servicing activities or repairs,
turn off engine and remove key from
Before starting work, carefully read the
Operator's Manual
2.14
SECTION 2
DESCRIPTION
ignition
Caution!