Storage - PRONAR VMP-5ST Manual

Pronar VMP-5ST | Pronar VMP-6ST
• Detergents should be kept in original containers, optionally in replacement
containers, but very clearly marked. Preparations may not be stored in food and
drink containers.
DANGER
Carefully read the instructions for application of detergents and maintenance
preparations.
While washing with detergents wear appropriate protective clothing and goggles
protecting against splashing.
• Ensure cleanliness of elastic conduits and seals. The plastic from which these
elements are made may be susceptible to organic substances and some
detergents. As a result of long-term reaction of some substances, the ageing
process may be accelerated and risk of damage increased. Rubber elements
should be maintained with the aid of special preparations after previous thorough
washing.
• Observe environmental protection principles and wash the mixer feeder in a place
designed for this purpose.
• Cleaning and drying of the mixer feeder must take place at temperatures above 0
o
C.

5.11 STORAGE

• Mixer feeder should be stored in a closed or roofed building.
• If the machine will not be used for a long time, it is essential to protect it from
adverse weather, especially rust and accelerated tyre deterioration. During this
time the machine must be unloaded. Mixer feeder should be very carefully
washed and dried.
• Corroded places should be cleaned of rust, degreased and protected using
undercoat paint and then painted with surface paint according to colour scheme.
• In the event of a prolonged work stoppage, it is essential to lubricate all
components regardless of the date of the last lubrication.
5.24
SECTION 5