Transport; Transport On Vehicle - PRONAR T900 Operator's Manual

Pronar T900
For detailed Terms & Conditions of Warranty, please refer to the WARRANTY BOOK
attached to each newly purchased machine.
TIP
Demand that the seller carefully and precisely fills out the Warranty Book and warranty
repair coupons. A missing date of purchase or sale point stamp may make the user
ineligible for any warranty repair or refund.
Modification of the trailer without the written consent of the Manufacturer is prohibited. In
particular, do NOT weld, drill holes in, cut or heat the main structural elements of the
machine, which have a direct impact on the machine operation safety.

1.5 TRANSPORT

The trailer is ready for sale completely assembled and does not require packing. Packing is
only required for the machine's technical documentation and any extra equipment. The trailer
is delivered to the user either transported on a vehicle or, after being attached to a tractor,
independently (trailer towed with a tractor).

1.5.1 TRANSPORT ON VEHICLE

Loading and unloading of trailer from vehicle shall be conducted using loading ramp with the
aid of an agricultural tractor. During work, adhere to the general principles of occupational
health and safety (OHS) applicable to reloading work. Persons operating reloading
equipment must have the qualifications required to operate these machines. The trailer must
be properly connected with the tractor according to the requirements in this Operators
Manual. The trailer braking system must be started and checked before driving off or onto
ramp.
The trailer should be attached firmly to the platform of the vehicle using straps or chains fitted
with a tightening mechanism. Securing elements should be attached to the transport catches
designed for this purpose (1) – figure (1.3), or permanent structural elements of the trailer
(longitudinal members, crossbars etc.) Transport lugs are welded to the lower frame
elements (3), a pair on each side of the trailer, and marked with decals (8) - see table (2.1).
Use certified and technically reliable securing measures. Worn straps, cracked securing
catches, bent or corroded hooks as well as elements damaged in a different way may be
1.10
SECTION 1