Cruise Group Settings; Trace Settings - Speco N8NRN User Manual

PTZ
details.
Edit Cruise
Select the camera and cruise in the "Cruise" interface. Enter the new cruise name and then click
to add preset to the cruise. Click
click to move down the preset and click
Delete Cruise
Click in the camera list on the right side of the interface to display the cruise information of the dome and then click
corner of the cruise to delete the cruise.

6.4 Cruise Group Settings

Click Start Settings Camera PTZ Cruise Group to go to the interface as shown below.
Add Cruise Group
Click "Add Cruise" to add the cruise, or click
the left panel as shown below to play the cruise lines in sequence.
Delete Cruise
In the cruise list, click

6.5 Trace Settings

Click Start Settings Camera PTZ Trace to go to the interface as shown below.
Trace Record
Select the PTZ camera and then click "Add" or extend the IPC information by clicking
that, click "Start Record" and move the speed dome to change its position and set its trace. Then click "Stop Record" to complete the trace record.
to edit the preset. Click
to move up the preset. Click
to extend the cruise list and then click
to delete the cruise.
to delete the preset from the cruise. Click one preset in the preset list and then
to start the cruise and click
and then click
30
NVR User Manual
to save the cruise name. Click "Add Preset"
to stop it.
on the top right
to add the cruise. After that, click "Play" on
to add a trace name. After