General Event Management
11.6.4 Buzzer
Click Start Settings AI/Event Event Notification Buzzer to go to the buzzer configuration interface. Set the delay time of the buzzer and then
click "Apply" to save the setting. You can click "Test" to test the buzzer.
11.6.5 Push Message
Click Start Settings
AI/Event
to save the settings. If Push Server is online, it will push messages to the mobile clients.
11.6.6 Digital Deterrent
Click Start Settings
AI/Event
Camera audio settings:
For perimeter alert cameras, voice broadcast can be set up. Select the camera, voice, broadcast times, volume and language. Then click "Apply" to
save the settings. When an alarm is triggered, camera will broadcast the voice you set.
Voice: click "Add" to add the alarm voice in wav. format. Click "Listen" to listen to the uploaded audio.
Click "Audio Device" to set the audio of the camera.
Event Notification Push Message to go to the interface as shown below. Check "Enable" and then click "Apply"
Event Notification Digital Deterrent to go to the interface as shown below.
67
NVR User Manual