Speco N8NRN User Manual page 46

Playback & Backup
Introduction of area ②:
Click on the playback window to show the tool bar as shown in area ③; right click on the window to show the menu list. The tool bar and menu
list are introduced in the table below.
Button
Button
Start button. Click it to pop up area ②.
Full screen button. Click it to show full screen; click it again to exit the full
screen.
Screen mode button.
OSD ON button. Click it to enable OSD; click it again to disable OSD.
Quick channel selection button
Stop button.
Rewind button. Click it to play video backward.
Play button. Click it to play video forward.
Pause button.
Deceleration button. Click it to decrease the playing speed.
Acceleration button. Click it to increase the playing speed.
Previous frame button. It works only when the forward playing is paused in
single screen mode.
Next frame button. It works only when the forward playing is paused in single
screen mode.
Click to step backward 30s and click
Click it to enter the smart playback interface
Event list/tag button. Click it to view the event record of
manual/schedule/sensor/ motion and the tag information.
Watermark button. Click it to enable watermark; click it again to disable
watermark.
Backup button. Drag the mouse on the time scale to select the time
periods and cameras, and then click the button to back up the record.
Backup status button. Click it to view the backup status.
Back button. Click it to return.
Button
Click it to go to record search and export interface; see 8.4 Record Search,
Playback & Backup for details.
Click it to Go to the live view interface; see Chapter 5 Live View
Introduction for details.
Click it to go to the intelligent analytics interface.
Menu List
-- Move tool. Click it to move the tool bar anywhere.
Click it to enable audio. You can listen to the camera audio by
Enable Audio
enabling audio.
Snapshot Click it to snap.
Click it to go to the zoom in interface. The zoom in interface is
similar to that of the camera window in the live view interface.
Click
Zoom In
record. When the record is paused in forward playing mode, you
can click
view the next frame.
Click it to add tag. You can play back the record by searching the
Add Tag added tag. Click it and then enter the tag name in the popup
window. Click "Add" to add tag.
Click it to switch the playback camera. Click it and then check the
Switch Camera
camera in the popup window. Click "OK" to change the camera.
Meaning
to step forward 30s.
Meaning
Meaning
to pause the record playing; click
to view the previous frame and click
40
NVR User Manual
:
to play the
to