Smart Playback - Speco N8NRN User Manual

Playback & Backup
Introduction of area ④:
Click to set the date; click
record type as required for record playback; first you should click
camera, then check the record type (
: POS record, if you want view the detailed smart playback icons, click
playback (the record time scale will show the record data of the checked record type only after the above operations).
Introduction of the record time scale (area ⑤):
Click to set the date; click
A tool bar will appear after moving the mouse to the record time scale. Click
to 24 hours' ratio. Drag the timeline or slide the scroll wheel of the mouse on the time scale to show the hidden time on the top or bottom of the
timeline. You can also click
timeline. Drag the slider at the bottom of the time scale to show the hidden playback cameras.
The record time scale shows different record types with different colors. The green block stands for manual record, red block stands for sensor
based record, yellow block stands for motion based record, blue block stands for schedule record and cyan block stands for intelligence record.
Click the record block to set the time and then the playback camera will play the record from the time you set.
Drag the color block on the time scale to select the backup area and then right click the area or click
Click button in the window to pop up the export window. Select the device, export path and format and then click "Export" button to start the
backup.

8.3 Smart Playback

In the playback interface, click
The descriptions of buttons in the smart playback interface
Close Camera Click it to close the playback camera.
to set the time and then the playback camera will play the record from the time you set. You can check the
: manual record; : sensor based record;
to set the time and then the playback camera will play the record from the time you set.
to show the hidden time on the top of the timeline or click
to go to the smart playback interface.
按钮
Full screen motion button.
Draw grid. You can search the record of motion detection in the pre-defined
area.
Draw line. You can search the record of crossing the line after drawing the
line.
Draw quadrilateral. You can search the record in this quadrilateral after
drawing it.
on the tool bar at the bottom of the interface to clear all the playback
: motion based record;
to switch). Finally, click
/ to zoom the timeline; click
to show the hidden time on the bottom of the
Description
41
NVR User Manual
: schedule record;
in the playback window to add camera for
to recover the timeline
to pop up an export information window.
: AI record;