EZ Setup & Main Interface
Manual: Set the "Sensor Record", "Motion Record" and "Schedule Record" of each camera. Click "OK" to save. See 7.1.1 Mode Configuration for
details.
⑧ QRCode. Enable the NAT function in the interface or set it in the network configuration after exiting the wizard (please refer to 13.1.8 NAT
Configuration for details). You can scan the QRCode through the Speco Blue App available for iOS and Android to easily and securely view your
cameras. Please refer to 14.1 Mobile Client Surveillance for details. Click "OK" to save the settings.
3.2 Main Interface
3.2.1 Main Interface Introduction
10
NVR User Manual