Related Manuals for Speco N32NRN
Summary of Contents for Speco N32NRN
- Page 1 NRN (32 Channel FR NVR) Quick Start Guide N32NRN Version 1.0 Features and specifications are subject to change, please check www.specotech.com for firmware updates.
-
Page 2: Important Safeguards And Warnings
Important Safeguards and Warnings Speco Technologies assumes no liability or responsibility for any fires or electrical shock caused by improper handling or installation. Speco Technologies is not liable for any problems caused by unauthorized modifications or attempted repair. - Page 3 Figure 1-2 Set Password and Security Questions 2.1 Enter a password Note: You will be prompted to set a Password and security questions upon initial bootup. See Fig 2-1 The default login ID and administrator username is: admin The password strength indicator can be used as a reference. Re-enter the password to confirm. Remember this password.
- Page 4 Figure 2-1 Update Firmware (if necessary) Speco will continuously make improvements, please check the website to ensure you are running the latest firmware version. 3.1 Check firmware version on recorder You can click Start→Settings→System→Information→Basic go to “About this machine” and click on “view”. You will then be able to see the firmware version number and build date.
-
Page 5: Updating Firmware
Figure 3-2 Figure 3-3 If the web has a more recent firmware version than your recorder’s build date, then please update your device to the latest firmware. 3.2 Updating Firmware 1. Copy the upgrade software into the USB storage device. 2. - Page 6 Figure 4 Tip: Check the “Enable EZ setup next time” box to display the EZ Setup wizard every time the device is rebooted. 4.1 General Settings – Date & Time When booting up for the first time, the device will prompt you for time settings or go to Settings→System→Date and Time for Figure 4-1.
-
Page 7: Disk Settings
System Time: Set the time and date format of the system DST: Toggle Daylight Saving Time On or Off Time format: Choose between 24-hour mode or 12-hour mode. NTP: Specify an NTP server to synchronize the time (optional). 4.2 Disk Settings Disk Settings. -
Page 8: Ddns Settings
4.5 DDNS Settings The DDNS is used to control the dynamic IP address through domain name. Speco Technologies provides free DDNS service with US-based servers. You can access the NVR easily if the DDNS is enabled and configured. Click Start→Settings →Network→DDNS to go to the interface as shown below. -
Page 9: Record Settings
Add Camera. Click “Refresh” to refresh the list of online IP cameras which are in the same local network with NVR and then click to add the searched camera. Click “Add All” to add all the cameras in the list. Click to delete the added camera. - Page 10 QRCode. Enable the NAT function in the interface or set it in the network configuration after exiting the wizard (please refer to manual for details). You can scan the QRCode through the Speco Blue App available for iOS and Android to easily and securely view your cameras.
-
Page 11: Web Browser Access
4.9 Web Browser Access Click Start→Settings→Network→NAT to go to the interface for NAT configuration and check “Enable”. Click “Apply” to save the settings and make note of the QR code number under the QR code. Via Internet Explorer, go to connect.specotech.cloud, input the QR code number, your username and password to login. - Page 12 Figure 4-6 5. EZ search EZ Search- Quickly search an instance using video thumbnails Click Start→Search and Export→EZ search. There are two view modes: by time and by camera. In the time view mode, a maximum of 64 camera thumbnails can be shown. ...
- Page 13 Figure 5-1 For detailed operation information, please refer to the user’s manual.
Need help?
Do you have a question about the N32NRN and is the answer not in the manual?
Questions and answers