Preset Setting; Cruise Setting - Speco N64NR48TB User Manual

PTZ
Click to start the cruise and click
selected cruise.
You can also go to cruise setting interface for cruise setting, see 6.3 Cruise Setting for details.

6.2 Preset Setting

Click StartSettingsCameraPTZPreset to go to the interface as shown below.
Add preset

Select camera and then click "Add" button to add preset; or click
information of the dome and then click
interface; please see 6.1 PTZ Control Interface Introduction for details.
Edit preset

Select camera and preset. You can enter the new name of the preset and then click
position, zoom, focus and iris of the preset and then click "Save Position" to save the preset.
Delete Preset

Select camera and preset and then click "Delete" to delete the preset.

6.3 Cruise Setting

Click StartSettingsCameraPTZCruise to go to the interface as shown below.
to stop the cruise in the cruise list of the cruise operation tab; click "Delete" button to delete the
in the camera list on the right side of the interface to display the preset
to add preset. The operations of the "Add Preset" window are similar to that of the PTZ control
34
to save the new preset name. Adjust the rotating speed,
NVR User Manual