General Event Management
11.7 Manual Alarm
Click
on the tool bar at the bottom of the live preview interface to pop up a window. Click "Trigger" to start alarm. Click "Clear" to stop alarm.
11.8 View Alarm Status
Click Start Settings Alarm Alarm Status or click
Click "Clear" to stop the buzzer when the buzzer alarm happens. Click
If the exception information is more than one page, you can enter the number in the box and then click
/
to view the exception alarm information in the previous/next page.
on the tool bar at the bottom of the live preview interface to view the alarm status.
to view the detail information as shown below.
69
NVR User Manual
to jump to the specified page. Click