Speco N8NRN User Manual page 82

Device Management
HTTP Port: the default HTTP port of the NVR is 80. The port number can be changed to others like 81. The port is mainly used to web client access.
If you want to access the NVR through a web browser, you should enter IP address plus HTTP port in the address bar of the web browser like
http://192.168.11.61:81.
HTTPS Port: the default HTTPs port of the NVR is 443.
HTTPs provides authentication of the web site and protects user privacy. How to use it?
① Enter IP address plus HTTP port in the address bar of the web browser. Then enter username and password to log in. Click Functional
Panel Network HTTPS to go to the following interface.
② Install a certificate.
* You can create a private certificate here. Click the "Create" button to create a private certificate. Enter the country (only two letters available),
domain (NVR's IP address/domain), validity date, password, province/state, region and so on. Then click "OK" to save the settings.
* If there is a signed certificate, click "Browse" to select it and then click "Install" to install it.
* Click "Create a certificate request" to enter the following interface.
Click "Create" to create the certificate request. Then download the certificate request and submit it to the trusted certificate authority for
signature. After receiving the signed certificate, import the certificate to the device.
③ After the certificate has been installed, enable this function and apply it. Then the camera can be accessed by entering https://IP: https port
via the web browser (eg. https://192.168.1.201:443).
Server Port: the default server port of the NVR is 6036. The server port number can be changed as required. The port is mainly used in network
video management system.
76
NVR User Manual