Cruise Setting - Speco H6HRN User Manual

PTZ
Select camera and then click "Add" button to add preset; or click
the interface to display the preset information of the dome and then click
operations of the "Add Preset" window is similar to that of the PTZ control interface; please see
for details.
Interface Introduction
➢ Edit preset
Select camera and preset. You can enter the new name of the preset and then click
preset name. Adjust the rotating speed, position, zoom, focus and iris of the preset and then click "Save
Position" to save the preset.
➢ Delete Preset
Select camera and preset and then click "Delete" to delete the preset.

6.3 Cruise Setting

Click Start→Settings→Camera→PTZ→Cruise to go to the interface as shown below.
➢ Add Cruise
Click in the camera list on the right side of the interface to display the cruise information of the dome
and then click
control interface; please see
➢ Edit Cruise
Select the camera and cruise in the "Cruise" interface. Enter the new cruise name and then click
save the cruise name. Click "Add Preset" to add preset to the cruise. Click
to delete the preset from the cruise. Click one preset in the preset list and then click
preset and click
➢ Delete Cruise
to add cruise. The operations of the "Add Cruise" window is similar to that of the PTZ
6.1 PTZ Control Interface Introduction
to move up the preset. Click
in the camera list on the right side of
for details.
to start the cruise and click
32
DVR User Manual
to add preset. The
6.1 PTZ Control
to save the new
to edit the preset. Click
to move down the
to stop it.
to