Cruise Setting - Speco N8NRN User Manual

Nrn (4 / 8 / 16 channel)

Hide thumbs Also See for N8NRN:

Table of Contents

PTZ

Add preset

Select camera and then click "Add" button to add preset; or click

information of the dome and then click

interface; please see 6.1 PTZ Control Interface Introduction for details.

Edit preset

Select camera and preset. You can enter the new name of the preset and then click

position, zoom, focus and iris of the preset and then click "Save Position" to save the preset.

Delete Preset

Select camera and preset and then click "Delete" to delete the preset.

6.3 Cruise Setting

Click Start Settings Camera PTZ Cruise to go to the interface as shown below.

Add Cruise

Click

in the camera list on the right side of the interface to display the cruise information of the dome and then click

The operations of the "Add Cruise" window is similar to that of the PTZ control interface; please see 6.1 PTZ Control Interface Introduction for

in the camera list on the right side of the interface to display the preset

to add preset. The operations of the "Add Preset" window are similar to that of the PTZ control

to save the new preset name. Adjust the rotating speed,

NVR User Manual

to add cruise.

Table of Contents

N4nrn N16nrn