Task Settings - Speco N8NRN User Manual

PTZ
Play or Stop Trace
Select the trace and click
Modify the Trace Name
On the left panel, enter new trace name and click
Delete the Trace
Click to delete the trace. Or put the cursor on the trace name (right panel) and then
click it to delete this trace.

6.6 Task Settings

Click Start Settings Camera PTZ Task to go to the interface as shown below.
① Select a PTZ camera.
② Select function, such as preset, cruise, trace, random scanning, etc.
③ Select a name, such as preset name, cruise name, etc.
④ Select the start and end time.
⑤ Click "Add" to add the task.
⑥ Click
to extend the tasks of the PTZ camera. Click
start the specific task at the specified time.
to play the trace; click to stop the trace.
to modify and save the trace name.
beside "Enable" to enable the task. After the task is enabled, the PTZ camera will
31
will appear on the right corner of the trace name;
NVR User Manual