Speco N8NRN User Manual page 40

Record & Disk Management
Set the schedule name and schedule time and then click "Add" to save the schedule. You can set day schedule or week schedule.
: delete button.
Set Day Schedule
Click and then drag the cursor on the time scale to set record time; click
selected area.
You can manually set the record start time and end time. Click
below. Set the start and end time in the window and then click "OK" to save the settings.
Click "All" to set all day recording; click "Reverse" to swap the selected and unselected time in a day; click "Clear All" to clear all the selected area in
a day.
Click "Copy To" to copy the schedule of the day to other days. Refer to the picture below. Check the days in the window and then click "OK" to save
the settings.
Set Week Schedule
Click and then click "Manual" beside
or
the days in the window and then click "OK" to save the settings.
and then drag the cursor on the time scale to delete the
or and then click "Manual" on each day to pop up a window as shown
to set the week schedule. Refer to the picture below. Set the start and end time, check
34
NVR User Manual
: add button;