PTZ
NVR User Manual
In the "Add Cruise" window, select the cruise line name. After that, click "Play" to play the cruise lines in sequence.
Trace Settings
On the right panel, click
to go to the trace setting tab. Click "Add" to add the trace name. Then click "OK" to save this name. Please refer to
the following picture.
After that, click "Start Record" to record the trace. Then click "Stop Record" to finish recording. Click
to play the recorded trace. Click
to
delete the trace.
6.2 Preset Setting
Click Start Settings Camera PTZ Preset to go to the interface as shown below.
28