Cruise Setting - Speco HRLN User Manual

PTZ
 Add preset
Select camera and then click "Add" button to add a preset; or click
information of the dome and then click
interface; please see 6.1 PTZ Control Interface Introduction for details.
Edit preset

Select camera and preset. You can enter the new name of the preset and then click
position, zoom, focus and iris of the preset and then click "Save Position" to save the preset.
Delete Preset

Select camera and preset and then click "Delete" to delete the preset.
6.3 Cruise Settings
Click StartSettingsCameraPTZCruise to go to the interface as shown below.
Add Cruise

Click in the camera list on the right side of the interface to display the cruise information of the dome and then click
cruise. The operations of the "Add Cruise" window is similar to that of the PTZ control interface; please see 6.1 PTZ Control Interface Introduction
for details.
Edit Cruise

Select the camera and cruise in the "Cruise" interface. Enter the new cruise name and then click
to add preset to the cruise. Click
to add a preset. The operation of the "Add Preset" window is similar to that of the PTZ control
to edit the preset. Click
in the camera list on the right side of the interface to display the preset
to save the new preset name. Adjust the rotating speed,
to delete the preset from the cruise. Click one preset in the preset list and
33
DVR User Manual
to save the cruise name. Click "Add Preset"
to add