Cruise Setting - Speco H16HRL User Manual

PTZ

Add preset
Select camera and then click "Add" button to add preset; or click
information of the dome and then click
interface; please see 6.1 PTZ Control Interface Introduction for details.

Edit preset
Select camera and preset. You can enter the new name of the preset and then click
position, zoom, focus and iris of the preset and then click "Save Position" to save the preset.

Delete Preset
Select camera and preset and then click "Delete" to delete the preset.

6.3 Cruise Setting

Click StartSettingsCameraPTZCruise to go to the interface as shown below.
in the camera list on the right side of the interface to display the preset
to add preset. The operations of the "Add Preset" window are similar to that of the PTZ control
33
to save the new preset name. Adjust the rotating speed,
DVR User Manual