Speco N8NRN User Manual page 8

Introduction
Supports time scale operation in quick playback and the playback date and time can be set randomly by scrolling the mouse; the time interval
of the time scale can be zoomed
Supports record searching by time slice/time/event/tag
Supports time view and camera view in searching by EZ mode
Supports EZ search by month, by day, by hour and by minute and time slice to be displayed with camera thumbnail
Supports a maximum of 4/8/16 cameras to be searched by time
Supports event search by manual/motion/sensor/intelligent events
Supports bookmark search by the manual added bookmarks
Supports instant playback of the selected camera in the live view interface
Supports a maximum of 16 synchronous playback cameras
Supports acceleration (maximum 32 times of the normal speed), deceleration (minimum 1/32 times of the normal speed) and 30s' addition or
reduction to current playing time
Record Export
Supports record to be exported through USB (U disk, mobile HDD).
Supports record to be exported by time/event/image search
Supports record cutting for exporting when playing back
Supports a maximum of 10 export tasks in background and export status viewing
Alarm Management
Supports alarm schedule setting
Supports enabling or disabling of the motion detection, external sensor alarm input, intelligence alarm and exception alarms including IP
address conflict alarm, disk IO error alarm, disk full alarm, no disk alarm, illegal access alarm, network disconnection alarm, IPC offline alarm and so
on, alarm trigger configuration supportable
Supports IPC offline alarm trigger configuration of PTZ, snapshot, pop-up video, etc.
Supports event notification modes of alarm-out, pop-up video, pop-up message box, buzzer, e-mail and so on
The captured images can be attached into the e-mail when alarm linkage is triggered
Supports alarm status view of alarm-in, alarm-out, motion detection and exception alarm
Supports alarm to be triggered and cleared manually
Supports system auto reboot when exception happens
Supports face detection and face match alarm
LPR Function
Support 50,000 license plate register
Support license plate detection, match and search
Support vehicle information statistics
Support license plate match alarm
Network Functions
Supports TCP/IP and PPPoE, DHCP, DNS, DDNS, UPnP, NTP, SMTP protocol and so on
Supports allow and block list function and the allow and block IP address/IP segment address can be set
Supports multiple browsers including IE8/9/10/11, Firefox, Opera, Chrome (available only for the versions lower than 45) and Safari in MAC
system
Supports remote achievement, configuration, import and export of the NVR parameters and other system maintenance operations including
remote upgrading and system restart
Supports remote camera configuration of the NVR including video parameters, image quality and so on
Supports remote search, playback and export of the NVR
Supports manual alarm to be triggered and cleared remotely
The motorized zoom camera can be adjusted through web client (Supports zoom in/out, but one key focus is not currently supported)
Supports NVMS or other platform management software to access the NVR and manage it
Supports NAT function and QRCode scanning by mobile phone and PAD
Supports mobile surveillance by phones or PADs with iOS or Android OS
Supports NVR to be accessed remotely through telnet and the telnet function can be enabled or disabled
If one camera recording is enabled or disabled manually through web client, it will be simultaneously enabled or disabled in the NVR
Other Functions
The NVR can be controlled and operated by the buttons on the front panel, the remote controller and the mouse
Setting interfaces can be switched to one another conveniently by clicking the main menus on the top of the setting interfaces
Supports NVR information viewing including basic, camera status, alarm status, record status, network status, disk and export status
Supports factory restoring, import and export of the system configuration, log view and export and local upgrading by USB mobile device
Supports auto recognition of the displayer's resolution
You can click the right mouse button at any interface to go back to the upper interface
2
NVR User Manual