Preset Setting; Cruise Setting - Speco N64NR24TB User Manual

PTZ
button to delete the selected cruise.
You can also go to cruise setting interface for cruise setting, see

6.2 Preset Setting

Click StartSettingsCameraPTZPreset to go to the interface as shown below.
Add preset

Select camera and then click "Add" button to add preset; or click
interface to display the preset information of the dome and then click
"Add Preset" window are similar to that of the PTZ control interface; please see
for details.
Edit preset

Select camera and preset. You can enter the new name of the preset and then click
Adjust the rotating speed, position, zoom, focus and iris of the preset and then click "Save Position" to save the
preset.
Delete Preset

Select camera and preset and then click "Delete" to delete the preset.

6.3 Cruise Setting

Click StartSettingsCameraPTZCruise to go to the interface as shown below.
6.3 Cruise Setting for details.
in the camera list on the right side of the
to add preset. The operations of the
6.1 PTZ Control Interface Introduction
35
NVR User Manual
to save the new preset name.