Toyota Prius 2010 Repair Manual page 94

NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
REPLACE A/C AMPLIFIER
7. CHECK HARNESS AND CONNECTOR (A/C AMPLIFIER - A/C PRESSURE SENSOR)
2010 Toyota Prius
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
A31-1 (-) - L17-13 (SG-2)
L17-13 (SG-2) - Body ground
Text in Illustration
Front view of wire harness connector
*1
(to A/C Amplifier)
Front view of wire harness connector
*2
(to A/C Pressure Sensor)
(a) Disconnect the A/C amplifier connector.
Condition Specified Condition
Always Below 1 Ω
Always 10 kΩ or higher
Repair Manual