Toyota Prius 2010 Repair Manual page 313
Hide thumbs
Also See for Prius 2010:
- Owner's manual (635 pages) ,
- User manual (610 pages) ,
- Repair manual (452 pages)
Advertisement
INSTALLATION
1. INSTALL COOLER CONDENSER ASSEMBLY
2. INSTALL NO. 2 FAN SHROUD
3. INSTALL HOOD LOCK SUPPORT SUB-ASSEMBLY
4. INSTALL NO. 1 INVERTER BRACKET
5. CONNECT NO. 7 INVERTER COOLING HOSE
2010 Toyota Prius
(a) Install the cooler condenser assembly with the 4 bolts to the hybrid
radiator assembly.
Torque: 9.0 N·m (92 kgf·cm, 80in·lbf)
(b) Install the cooler condenser assembly.
HINT:
If the condenser is replaced with a new one, add compressor oil to the new
condenser.
Capacity:
40 cc (1.35 fl. oz.)
Compressor oil:
ND-11 or equivalent
NOTICE:
Do not use any compressor oil other than ND-OIL 11 or equivalent. If any
compressor oil other than ND-OIL 11 or equivalent is used, compressor
motor insulation performance may decrease, resulting in a leakage of
electric power.
(a) Using pliers, grip the claws of the clip and slide the clip to connect the
No. 7 inverter cooling hose.
Repair Manual
Advertisement
