Toyota Prius 2010 Repair Manual page 298
Hide thumbs
Also See for Prius 2010:
- Owner's manual (635 pages) ,
- User manual (610 pages) ,
- Repair manual (452 pages)
Advertisement
4. CONNECT DISCHARGE HOSE SUB-ASSEMBLY
(a) Remove the attached vinyl tape from the hose.
(b) Sufficiently apply compressor oil to a new O-ring and the fitting surface of the compressor and magnetic
clutch.
Compressor oil:
ND-OIL 11 or equivalent
(c) Install the O-ring onto the discharge hose sub-assembly.
NOTICE:
Keep the O-ring and O-ring fitting surfaces free from dirt or any foreign objects.
Do not use any compressor oil other than ND-OIL 11 or equivalent. If any compressor oil other than
ND-OIL 11 or equivalent is used, compressor motor insulation performance may decrease, resulting in a
leakage of electric power.
5. CONNECT NO. 2 RADIATOR HOSE
2010 Toyota Prius
(d) Install the discharge hose sub-assembly onto the compressor and
magnetic clutch with the bolt.
Torque: 9.8 N·m (100 kgf·cm, 87in·lbf)
(a) Using pliers, grip the claws of the clip and slide the clip to install the
No. 2 radiator hose.
Repair Manual
Advertisement
