Toyota Prius 2010 Repair Manual page 142

NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
6. INSPECT ELECTRIC VEHICLE FUSE
CAUTION:
Be sure to wear insulated gloves.
(a) Turn the power switch off.
2010 Toyota Prius
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
D12-1 (CLK) - A21-19 (CLK)
D12-2 (DIN) - A21-31 (ITE)
D12-3 (DOUT) - A21-30 (ETI)
D12-1 (CLK) - Body ground
D12-2 (DIN) - Body ground
D12-3 (DOUT) - Body ground
Text in Illustration
Front view of wire harness connector
*1
(to Power Management Control ECU)
Front view of wire harness connector
*2
(to Compressor with Motor Assembly)
Condition Specified Condition
Always Below 1 Ω
Always Below 1 Ω
Always Below 1 Ω
Always 10 kΩ or higher
Always 10 kΩ or higher
Always 10 kΩ or higher
Repair Manual