Toyota Prius 2010 Repair Manual page 166

2. CHECK HARNESS AND CONNECTOR (A/C CONTROL ASSEMBLY - BATTERY)
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
3. CHECK HARNESS AND CONNECTOR (A/C AMPLIFIER - A/C CONTROL ASSEMBLY)
2010 Toyota Prius
Tester Connection
L20-8 (GND) - Body ground
Text in Illustration
Front view of wire harness connector
*1
(to A/C Control Assembly)
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
(a) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Tester Connection
L20-5 (IG+) - L20-8 (GND) Power switch on (IG) 11 to 14 V
Text in Illustration
Front view of wire harness connector
*1
(to A/C Control Assembly)
(a) Disconnect the A/C amplifier connector.
Condition Specified Condition
Always Below 1 Ω
Condition Specified Condition
Repair Manual