Toyota Prius 2010 Repair Manual page 148

(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
I6-5 (GND) - Body ground
Text in Illustration
Front view of wire harness connector
*1
(to Plasmacluster (Ion Generator))
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
3. CHECK HARNESS AND CONNECTOR (PLASMACLUSTER (ION GENERATOR) - BATTERY)
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
CHECK HARNESS AND CONNECTOR (PLASMACLUSTER (ION GENERATOR) - A/C
4.
AMPLIFIER)
2010 Toyota Prius
Condition
Always
(a) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Tester Connection
I6-2 (IG) - Body ground Power switch off
I6-2 (IG) - Body ground Power switch on (IG) 11 to 14 V
Text in Illustration
Front view of wire harness connector
*1
(to Plasmacluster (Ion Generator))
(a) Disconnect the A/C amplifier connector.
Specified Condition
Below 1 Ω
Condition Specified Condition
Below 1 V
Repair Manual