Toyota Prius 2010 Repair Manual page 46

CUSTOMIZE PARAMETERS
HINT:
The following items can be customized.
NOTICE:
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Air Conditioner
Display (Item)
Set Temperature
Shift
Compressor Mode
Air Inlet Mode
Foot/DEF Auto
Mode
Foot/DEF Automatic
Blow Up Function
Ambient
Temperature Shift
ECO MODE Cancel OFF
Noise and Vibration
Reduction
Start Pre A/C*1
Stop Pre A/C*1
*1: w/ Remote Air Conditioning System
2010 Toyota Prius
Default
Function to control with the shifted temperature
Normal
against the displayed temperature.
Function to automatically turn the A/C on by pressing
Automatic the AUTO button when blower is on and the A/C is
off.
Function to shift from INLET mode to
Automatic
RECIRCULATION mode when the A/C is turned on.
Function to automatically turn the airflow from
ON
FOOT/DEF on when AUTO mode is on.
Function to automatically increase the blower level
ON
when the defroster is on.
Function to control the shifted ambient temperature in
Normal
relation to the displayed ambient temperature.
Function to cancel the ECO mode drive when item is
on.
Function to change speed of the compressor when
OFF
item is on.
Function to set the activation operation method for the
Long1 remote air conditioning system using the key
(electrical transmitter).
Function to set the stop operation method for the
2 tim ON remote air conditioning system using the key
(electrical transmitter).
Content Setting
+2 C, +1 C, Normal, -
1 C or -2 C
Manual or Automatic
Manual or Automatic
OFF or ON
OFF or ON
+3 C, +2 C, +1 C,
Normal, -1 C, -2 C or
-3 C
OFF or ON
OFF or ON
1 tim ON, 2 tim ON,
Long1 or Long2
1 tim ON, 2 tim ON,
Long1 or Long2
Repair Manual