Download Print this page

Toyota Prius 2010 Repair Manual page 172

Hide thumbs Also See for Prius 2010:

Advertisement

Standard Resistance:
Tester Connection
L33-1 (GND) - Body ground
Text in Illustration
Front view of wire harness connector
*1
(to Blower Motor)
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
3.
CHECK HARNESS AND CONNECTOR (BLOWER MOTOR - BATTERY)
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
4.
CHECK HARNESS AND CONNECTOR (BLOWER MOTOR - A/C AMPLIFIER)
2010 Toyota Prius
Condition
Always
(a) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Tester Connection
L33-3 (+B) - Body ground Power switch off 11 to 14 V
Text in Illustration
Front view of wire harness connector
*1
(to Blower Motor)
(a) Disconnect the A/C amplifier connector.
Specified Condition
Below 1 Ω
Condition
Specified Condition
Repair Manual

Advertisement

loading