Toyota Prius 2010 Repair Manual page 193

Tester Connection
z9-3 (AC1) - z9-8 (EAU)
z9-3 (AC1) - z9-8 (EAU)
z9-3 (AC1) - z9-8 (EAU)
z9-3 (AC1) - z9-8 (EAU)
Text in Illustration
Component without harness connected
*1
(Steering Pad Switch Assembly)
*3 TEMP+ Switch
NG
REPLACE STEERING PAD SWITCH ASSEMBLY
OK
4. INSPECT SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
2010 Toyota Prius
Condition
No switch pushed
R/F switch pushed
TEMP+ switch pushed
TEMP- switch pushed
(a) Disconnect the connector from the spiral with sensor cable sub-
assembly.
Condition
Specified Condition
95 to 105 kΩ
323 to 335 Ω
980 to 1020 Ω
3048 to 3172 Ω
*2 R/F Switch
*4 TEMP- Switch
Specified Condition
Repair Manual