Toyota Prius 2010 Repair Manual page 282

DISASSEMBLY
1. REMOVE AIR INLET CONTROL SERVO MOTOR SUB-ASSEMBLY
2. REMOVE AIR FILTER CASE
3. REMOVE CLEAN AIR FILTER
4. REMOVE FRONT BLOWER MOTOR SUB-ASSEMBLY (w/o Solar Ventilation System)
2010 Toyota Prius
(a) Remove the 2 screws and air inlet control servo motor sub-assembly.
(a) Disengage the claw and guide, and remove the air filter case as shown
in the illustration.
(a) Remove the clean air filter as shown in the illustration.
Repair Manual