Toyota Prius 2010 Repair Manual page 93

5. CHECK HARNESS AND CONNECTOR (A/C AMPLIFIER - A/C PRESSURE SENSOR)
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
REPLACE A/C AMPLIFIER
6. CHECK HARNESS AND CONNECTOR (A/C AMPLIFIER - A/C PRESSURE SENSOR)
2010 Toyota Prius
(a) Disconnect the A/C amplifier connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
A31-3 (+) - L17-10 (S5-3)
L17-10 (S5-3) - Body ground
Text in Illustration
Front view of wire harness connector
*1
(to A/C Amplifier)
Front view of wire harness connector
*2
(to A/C Pressure Sensor)
(a) Disconnect the A/C amplifier connector.
Condition Specified Condition
Always Below 1 Ω
Always 10 kΩ or higher
Repair Manual