Toyota Prius 2010 Repair Manual page 177

NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
10. CHECK HARNESS AND CONNECTOR (BLOWER MOTOR - BODY GROUND)
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
L33-1 (GND) - Body ground
Text in Illustration
Front view of wire harness connector
*1
(to Blower Motor)
2010 Toyota Prius
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
L104-2 - Body ground
Text in Illustration
Front view of wire harness connector
*1
(to Solar Ventilation Relay)
(a) Disconnect the blower motor connector.
Condition
Always
Condition Specified Condition
Always Below 1 Ω
Specified Condition
Below 1 Ω
Repair Manual