Toyota Prius 2010 Repair Manual page 327

INSTALLATION
1. INSTALL NO. 1 COOLER THERMISTOR
2. INSTALL COOLER EVAPORATOR SUB-ASSEMBLY
3. INSTALL COOLER EXPANSION VALVE
4. INSTALL BLOWER ASSEMBLY
5. INSTALL AIR CONDITIONING UNIT ASSEMBLY
HINT:
Refer to the procedure for Install Air Conditioning Unit Assembly
2010 Toyota Prius
(a) Install the No. 1 cooler thermistor as shown in the illustration.
Part
A 175 mm
B 161.6 mm
C 87.9 mm
D 50 mm
Text in Illustration
*1 From Tank
*2 Fixed Part
*3 Sensor Part
Be sure to insert the thermistor only once because reinserting it
into the same position will not allow it to be firmly secured.
When reusing the evaporator, insert the thermistor one row next to
the one that has been used previously (X in the illustration).
After inserting the thermistor, do not apply excessive force to the
wire.
Directly insert the thermistor until the edge of plastic case "a"
comes into contact with evaporator "b".
Length
6.89 in.
6.36 in.
3.46 in.
1.99 in.
.
Repair Manual