NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
3.
INSPECT STEERING PAD SWITCH ASSEMBLY
(a) Disconnect the connector from the steering pad switch assembly.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
2010 Toyota Prius
Front view of wire harness connector
*3
(to Spiral with Sensor Cable Sub-assembly)
*4: w/ Navigation System
*5: w/o Navigation System (for 8 Speakers)
*6: w/o Navigation System (for 6 Speakers)
Condition
Specified Condition
Repair Manual