Toyota Prius 2010 Repair Manual page 311

REASSEMBLY
1. INSTALL COOLER DRYER
2. INSTALL COOLER CONDENSER CUSHION
(a) for LH Side:
2010 Toyota Prius
(a) Using pliers, install a new cooler dryer to the modulator.
(b) Sufficiently apply compressor oil to a new O-ring and the fitting
surfaces of the cap.
Compressor oil:
ND-OIL 11 or equivalent
(c) Using a 14 mm straight hexagon wrench, install the cap to the cooler
condenser core.
Torque: 2.9 N·m (30 kgf·cm, 26in·lbf)
Keep the O-ring and O-ring fitting surfaces clean from dirt or any
foreign objects.
Do not use any compressor oil other than ND-OIL 11 or
equivalent. If any compressor oil other than ND-OIL 11 or
equivalent is used, compressor motor insulation performance may
decrease, resulting in a leakage of electric power.
Text in Illustration
*1 14 mm Straight Hexagon Wrench
*2 Modulator
(1) Install the cooler condenser cushion.
Repair Manual