Toyota Prius 2010 Repair Manual page 272

Do not use any compressor oil other than ND-OIL 11 or equivalent. If any compressor oil other than ND-OIL 11 or
equivalent is used, compressor motor insulation performance may decrease, resulting in a leakage of electric
power.
(d) Install the air conditioning tube and accessory assembly.
91. CONNECT SUCTION PIPE SUB-ASSEMBLY
(a) Remove the attached vinyl tape from the pipe.
(b) Sufficiently apply compressor oil to a new O-ring and the fitting surface of the suction pipe sub-assembly.
Compressor oil:
ND-OIL 11 or equivalent
(c) Install the O-ring on the suction pipe sub-assembly.
NOTICE:
Keep the O-ring and O-ring fitting surfaces clean from dirt or any foreign objects.
Do not use any compressor oil other than ND-OIL 11 or equivalent. If any compressor oil other than ND-OIL 11 or
equivalent is used, compressor motor insulation performance may decrease, resulting in a leakage of electric
power.
(d) Install the suction pipe sub-assembly.
(f) Insert the pipe joint into the fitting hole securely and tighten the bolt.
Torque: 9.8 N·m (100 kgf·cm, 87in·lbf)
92. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY
93. INSTALL COWL BODY MOUNTING REINFORCEMENT LH
2010 Toyota Prius
(e) Move the hook connector in the direction indicated by the arrow in the
illustration.
Repair Manual