Download Print this page

Toyota Prius 2010 Repair Manual page 230

Hide thumbs Also See for Prius 2010:

Advertisement

17. DISCONNECT SUCTION PIPE SUB-ASSEMBLY
(b) Disconnect the suction pipe assembly.
(c) Remove the O-ring from the suction pipe sub-assembly.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
18. DISCONNECT AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY
(a) Disconnect the air conditioning tube and accessory assembly.
(b) Remove the O-ring from the air conditioning tube and accessory assembly.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
19. DISCONNECT INLET HEATER WATER HOSE
2010 Toyota Prius
(a) Remove the bolt and slide the hook connector.
(a) Using pliers, grip the claws of the clip and slide the clip to disconnect
the inlet heater water hose.
Do not apply excessive force to the inlet heater water hose.
Prepare a drain pan or cloth in case the coolant leaks.
Repair Manual

Advertisement

loading