3 Controlling Operation and Data Output with Ethernet
3-1-4
Communication Specifications Settings [EtherNet/IP]
Setting IP Address and Industrial Protocol
In the AutoVISION software, set the IP address and industrial protocol for the smart camera according
to your network of external devices such as the PLC.
1
From the Windows Start menu, click Omron AutoVISION.
This launches the OMRON AutoVISION software.
2
Click Select Device.
3
Click the smart camera for which you want to change the settings.
The following screen is displayed.
3-6
F440-F/F430-F/F420-F Series Smart Camera User's Manual for Communication Settings (Z444)