3 Controlling Operation and Data Output with Ethernet
4
The Reboot Required dialog box is displayed. Reboot the smart camera according to the mes-
sage.
Precautions for Correct Use
After you change the industrial protocol, you need to reboot the smart camera to have the new
setting take effect.
5
"The Connection to the device FXXX-XXXXXXX has been lost" screen is displayed. Click
Reconnect.
6
Confirm that PROFINET is displayed for Industrial Protocol.
3-3-5
Slot/Subslot Layout Descriptions
The slot/subslot layout is shown below.
3-46
F440-F/F430-F/F420-F Series Smart Camera User's Manual for Communication Settings (Z444)